hadoop开启Service Level Authorization 服务级认证

  • 时间:
  • 浏览:0
  • 来源:极速快3_快3软件_极速快3软件

背景描述

  最近在进行安全扫描的事先 ,说hadoop位于漏洞,Hadoop 未授权访问【原理扫描】,我希望就参考官方文档及越多越多资料,在测试环境中进行了开启,上边就遇到了越多越多的坑,因为说个人没有想明白的问题,在此记录下吧,越多越多问题搞了2天。

环境描述

  hadoop版本:2.6.2

操作步骤

1.越多开启服务级认证,需要在core-site.xml文件中开启参数hadoop.security.authorization,将其设置为true

<property>
  <name>hadoop.security.authorization</name>
  <value>true</value>
  <description>Is service-level authorization enabled?</description>
</property>

备注:根据官方文档的解释,设置为true越多越多simple类型的认证,基于OS用户的认证.现在服务级的认证因为开启了。

增加此参数事先 ,需要重启namenode:

sbin/hadoop-daemon.sh stop namenode
sbin/hadoop-daemon.sh start namenode

怎么知道是否真正的开启了该配置,查看hadoop安全日志SecurityAuth-aiprd.audit,因为有新日志增加,上边富含认证信息,说明开启成功。

2.针对具体的各个服务的认证,在配置文件hadoop-policy.xml中

<configuration>
  <property>
    <name>security.client.protocol.acl</name>
    <value>*</value>
    <description>ACL for ClientProtocol, which is used by user code
    via the DistributedFileSystem.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.client.datanode.protocol.acl</name>
    <value>*</value>
    <description>ACL for ClientDatanodeProtocol, the client-to-datanode protocol
    for block recovery.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.datanode.protocol.acl</name>
    <value>*</value>
    <description>ACL for DatanodeProtocol, which is used by datanodes to
    communicate with the namenode.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.inter.datanode.protocol.acl</name>
    <value>*</value>
    <description>ACL for InterDatanodeProtocol, the inter-datanode protocol
    for updating generation timestamp.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.namenode.protocol.acl</name>
    <value>*</value>
    <description>ACL for NamenodeProtocol, the protocol used by the secondary
    namenode to communicate with the namenode.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

 <property>
    <name>security.admin.operations.protocol.acl</name>
    <value>*</value>
    <description>ACL for AdminOperationsProtocol. Used for admin commands.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.refresh.user.mappings.protocol.acl</name>
    <value>*</value>
    <description>ACL for RefreshUserMappingsProtocol. Used to refresh
    users mappings. The ACL is a comma-separated list of user and
    group names. The user and group list is separated by a blank. For
    e.g. "alice,bob users,wheel".  A special value of "*" means all
    users are allowed.</description>
  </property>

  <property>
    <name>security.refresh.policy.protocol.acl</name>
    <value>*</value>
    <description>ACL for RefreshAuthorizationPolicyProtocol, used by the
    dfsadmin and mradmin commands to refresh the security policy in-effect.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.ha.service.protocol.acl</name>
    <value>*</value>
    <description>ACL for HAService protocol used by HAAdmin to manage the
      active and stand-by states of namenode.</description>
  </property>

  <property>
    <name>security.zkfc.protocol.acl</name>
    <value>*</value>
    <description>ACL for access to the ZK Failover Controller
    </description>
  </property>

  <property>
    <name>security.qjournal.service.protocol.acl</name>
    <value>*</value>
    <description>ACL for QJournalProtocol, used by the NN to communicate with
    JNs when using the QuorumJournalManager for edit logs.</description>
  </property>

  <property>
    <name>security.mrhs.client.protocol.acl</name>
    <value>*</value>
    <description>ACL for HSClientProtocol, used by job clients to
    communciate with the MR History Server job status etc. 
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <!-- YARN Protocols -->

  <property>
    <name>security.resourcetracker.protocol.acl</name>
    <value>*</value>
    <description>ACL for ResourceTrackerProtocol, used by the
    ResourceManager and NodeManager to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.resourcemanager-administration.protocol.acl</name>
    <value>*</value>
    <description>ACL for ResourceManagerAdministrationProtocol, for admin commands. 
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.applicationclient.protocol.acl</name>
    <value>*</value>
    <description>ACL for ApplicationClientProtocol, used by the ResourceManager 
    and applications submission clients to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.applicationmaster.protocol.acl</name>
    <value>*</value>
    <description>ACL for ApplicationMasterProtocol, used by the ResourceManager 
    and ApplicationMasters to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.containermanagement.protocol.acl</name>
    <value>*</value>
    <description>ACL for ContainerManagementProtocol protocol, used by the NodeManager 
    and ApplicationMasters to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.resourcelocalizer.protocol.acl</name>
    <value>*</value>
    <description>ACL for ResourceLocalizer protocol, used by the NodeManager 
    and ResourceLocalizer to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.job.task.protocol.acl</name>
    <value>*</value>
    <description>ACL for TaskUmbilicalProtocol, used by the map and reduce
    tasks to communicate with the parent tasktracker.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.job.client.protocol.acl</name>
    <value>*</value>
    <description>ACL for MRClientProtocol, used by job clients to
    communciate with the MR ApplicationMaster to query job status etc. 
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.applicationhistory.protocol.acl</name>
    <value>*</value>
    <description>ACL for ApplicationHistoryProtocol, used by the timeline
    server and the generic history service client to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>
</configuration>

备注:默认有10个服务,每个服务的默认值是否*,表示的越多越多任何的用户需要对其进行访问。

3.目前只需要针对客户端那先 用户越多 访问namenode即可,即修改参数security.client.protocol.acl的值

  <property>
    <name>security.zkfc.protocol.acl</name>
    <value>aiprd</value>
    <description>ACL for access to the ZK Failover Controller
    </description>
  </property>

备注:表示客户端进行对应的用户是aiprd的就需要访问namenode。

刷新ACL配置:

bin/hdfs dfsadmin -refreshServiceAcl

修改格式如下:

<property>
     <name>security.job.submission.protocol.acl</name>
     <value>user1,user2 group1,group2</value>
</property>

备注:该值是,用户之间逗号隔开,用户组之间用逗号隔开,用户和用户组之间用空格分开,因为没有用户,要以空格开头上边接用户组。

4.远程客户端访问hdfs中文件进行验证

[aiprd@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/
Found 10 items
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 04:31 hdfs://hadoop1:9000/hbase
drwxr-xr-x   - aiprd  hadoop              0 2019-08-14 06:40 hdfs://hadoop1:9000/test01
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:22 hdfs://hadoop1:9000/test02
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:39 hdfs://hadoop1:9000/test03
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:60

 hdfs://hadoop1:9000/test07
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:31 hdfs://hadoop1:9000/test08
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:32 hdfs://hadoop1:9000/test09
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:41 hdfs://hadoop1:9000/test10
drwxrwx---   - aiprd  supergroup          0 2019-08-14 07:06 hdfs://hadoop1:9000/test11
drwxr-xr-x   - aiprd1 supergroup          0 2019-08-15 00:10 hdfs://hadoop1:9000/test12

备注:在客户端上,将hadoop的tcp连接部署在aiprd用户下,执行命令越多 查看其中的文件、文件夹信息。一同,aiprd用户也是启动namenode的用户即hadoop中的超级用户,越多越多,查看到的文件的用户组是否aiprd.

5.测试,因为增加因为使用越多越多的用户是否需要

  <property>
    <name>security.zkfc.protocol.acl</name>
    <value>aiprd1</value>
    <description>ACL for access to the ZK Failover Controller
    </description>
  </property>

刷新ACL配置。

bin/hdfs dfsadmin -refreshServiceAcl

将用户修改aiprd1。即没有客户端的tcp连接用户是aiprd1越多 访问。

6.在客户端中,继续使用事先 部署在aiprd用户下的hadoop客户端进行访问

[aiprd@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/
ls: User aiprd (auth:SIMPLE) is not authorized for protocol interface org.apache.hadoop.hdfs.protocol.ClientProtocol, expected client Kerberos principal is null

备注:发现aiprd用户是没有访问的了

7.客户端中,在aiprd1用户下,在部署hadoop客户端,我希望进行访问

[aiprd1@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/test12
Found 6 items
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/01
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/02
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/03
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:44 hdfs://hadoop1:9000/test12/04
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:49 hdfs://hadoop1:9000/test12/05
drwxr-xr-x   - aiprd1 supergroup          0 2019-08-15 00:10 hdfs://hadoop1:9000/test12/10

备注:是越多 访问的,越多越多,因为要使用用户来进行认证,没有客户端tcp连接对应的OS用户,需要要和hadoop-policy.xml中配置的用户一致我希望没有访问。

既然,服务级参数的值,需却说用户,也需却说用户组,用户验证完了,没有来验证用户组吧,此时,就遇到了越多越多的坑。

1.还是事先 的参数security.zkfc.protocol.acl,这次使用,用户组

  <property>
    <name>security.zkfc.protocol.acl</name>
    <value>aiprd hadoop</value>
    <description>ACL for access to the ZK Failover Controller
    </description>
  </property>

刷新ACL配置:

/bin/hdfs dfsadmin -refreshServiceAcl

没有问题来了,事先 的用户是基于OS级别的判断,越多越多应该也是,也越多越多判断我越多越多用户到底是否越多越多用户组上边的。

2.在客户端上aiprd用户下的tcp连接是需要访问的,经过事先 的验证没有问题

3.在客户端上,在aiprd1下部署hadoop客户端tcp连接,正常是访问不了hdfs的,没有将aiprd1加入到越多越多hadoop组下,理论上是需要访问的

[aiprd1@localhost ~]$ id aiprd1
uid=60

1(aiprd1) gid=60

1(aiprd1) groups=60

1(aiprd1),60

2(hadoop)
[aiprd1@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/test12
ls: User aiprd1 (auth:SIMPLE) is not authorized for protocol interface org.apache.hadoop.hdfs.protocol.ClientProtocol, expected client Kerberos principal is null

经过验证,是需要的,说明越多越多hadoop分组并没有起作用。

试了如下的土法律法律依据:

  • --1.hadoop.security.group.mapping 改了越多越多参数的值,实在越多越多参数有默认的值,需要进行设置的
  • --2.在hdfs所有的节点都建了hadoop用户组,还是没有补救问题
  • --3.默认的hdfs中文件的用户组是supergroup,也尝试将aiprd1加入到supergroup中,还是没有作用
  • --4.使用aiprd越多越多超级用户,将hdfs中文件的用户组改为hadoop还是没有效果
  • --5.尝试在namenode上将aiprd加入到hadoop组还是没有效果。

实在没有土法律法律依据,开启DEBUG吧,开启事先 ,获得信息如下:

2019-08-15 15:12:27,188 WARN org.apache.hadoop.security.ShellBasedUnixGroupsMapping: got exception trying to get groups for user aiprd1: id: aiprd1: No such user

2019-08-15 15:12:27,188 WARN org.apache.hadoop.security.UserGroupInformation: No groups available for user aiprd1
adoop.hdfs.protocol.ClientProtocol, expected client Kerberos principal is null
:SIMPLE)
2019-08-15 15:12:27,188 DEBUG org.apache.hadoop.ipc.Server: Socket Reader #1 for port 9000: responding to null from 192.168.60

.1:61985 Call#-3 Retry#-1
2019-08-15 15:12:27,188 DEBUG org.apache.hadoop.ipc.Server: Socket Reader #1 for port 9000: responding to null from 192.168.60

.1:61985 Call#-3 Retry#-1 Wrote 243 bytes.
izationException: User aiprd1 (auth:SIMPLE) is not authorized for protocol interface 

意思是说,当试着为越多越多用户查找用户组的事先 ,没有越多越多用户,就很奇怪,明明是有用户的啊。我希望就基于越多越多报错各种查找,我希望在下面的文章中获得了点启示:

https://www.e-learn.cn/content/wangluowenzhang/1136832
To accomplish your goal you'd need to add your user account (clott) on the NameNode machine and add it to hadoop group there.

If you are going to run MapReduce with your user, you'd need your user account to be configured on NodeManager hosts as well.

4.按照越多越多意思,在Namenode节点上,创建aiprd1用户,并加入到hadoop用户组上边。

[root@hadoop1 ~]# useradd -G hadoop aiprd1
[root@hadoop1 ~]# id aiprd1
uid=60

3(aiprd1) gid=60

3(aiprd1) groups=60

3(aiprd1),60

2(hadoop)
[root@hadoop1 ~]# su - aiprd
[aiprd@hadoop1 ~]$ jps
15289 NameNode
15644 Jps

备注:此节点运行了NameNode.

5.再次在hadoop客户端上,aiprd1用户下执行查询操作

[aiprd1@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/test12
Found 6 items
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/01
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/02
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/03
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:44 hdfs://hadoop1:9000/test12/04
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:49 hdfs://hadoop1:9000/test12/05
drwxr-xr-x   - aiprd1 supergroup          0 2019-08-15 00:10 hdfs://hadoop1:9000/test12/10

需要进行查询了。

在客户端上,将aiprd1对应的用户组hadoop加带。

[aiprd1@localhost ~]$ id
uid=60

1(aiprd1) gid=60

1(aiprd1) groups=60

1(aiprd1)

再次执行查询:

[aiprd1@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/test12
Found 6 items
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/01
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/02
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/03
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:44 hdfs://hadoop1:9000/test12/04
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:49 hdfs://hadoop1:9000/test12/05
drwxr-xr-x   - aiprd1 supergroup          0 2019-08-15 00:10 hdfs://hadoop1:9000/test12/10

还是需要查询的,需要看出来,用户组和客户端上用户所在的组没有关系,需要在Namenode节点设置。

查看官方,有如下解释:

Once a username has been determined as described above, the list of groups is determined by a group mapping service, configured by the hadoop.security.group.mapping property. The default implementation, org.apache.hadoop.security.JniBasedUnixGroupsMappingWithFallback, will determine if the Java Native Interface (JNI) is available. If JNI is available, the implementation will use the API within hadoop to resolve a list of groups for a user. If JNI is not available then the shell implementation, org.apache.hadoop.security.ShellBasedUnixGroupsMapping, is used. This implementation shells out with the bash -c groups command (for a Linux/Unix environment) or the net group command (for a Windows environment) to resolve a list of groups for a user.

An alternate implementation, which connects directly to an LDAP server to resolve the list of groups, is available via org.apache.hadoop.security.LdapGroupsMapping. However, this provider should only be used if the required groups reside exclusively in LDAP, and are not materialized on the Unix servers. More information on configuring the group mapping service is available in the Javadocs.

For HDFS, the mapping of users to groups is performed on the NameNode. Thus, the host system configuration of the NameNode determines the group mappings for the users.

Note that HDFS stores the user and group of a file or directory as strings; there is no conversion from user and group identity numbers as is conventional in Unix.

对于HDFS来说,用户到组的映射关系是在NameNode上执行的,我希望,NameNode的主机系统配置决定了用户组的映射。

实验事先 才看明白,事先 根本没有理解,以为是从客户端拿到用户对应的用户组信息,我希望到NameNode来进行判断呢。

越多越多,到这里,基于服务级的ACL,用户、用户组的都因为需要配置了,对于越多越多的服务,需要根据实际情形进行配置。这上边我希望求那先 用户、用户组需要连接上来就好了。

小结

  1.hadoop.security.authorization设置为true,开启simple认证,即基于os用户的认证,配置事先 ,重启namenode

  2.acl为用户认证的,保证服务acl中配置的值与客户端tcp连接对应的用户一致即可访问。

  3.acl为用户组的,客户端因为使用A访问,没有要在NameNode上创建用户A,将A加入到acl用户组,验证过程:获取客户端的用户,比如为A,NameNode节点上,通过用户A,到NameNode的主机上来查找用户A对应的用户组信息,因为NameNode上没有用户A,认证失败,因为有用户A,没有在acl用户组上,认证失败,有用户A,用户A在acl配置的组上边,认证成功。

  4.acl配置的用户组与客户端tcp连接用户,所在的用户组没有关系。

  5.每次修改hadoop-policy.xml中的值,记得要执行刷新操作。

另外:要注意,不同版本的参数,配置因为不同,要看和个人hadoop版本一致的文档。

https://hadoop.apache.org/docs/r2.6.2/hadoop-project-dist/hadoop-common/ServiceLevelAuth.html

 https://hadoop.apache.org/docs/r2.6.2/hadoop-project-dist/hadoop-hdfs/HdfsPermissionsGuide.html#Group_Mapping

文档创建时间:2019年8月15日17:60 :24